Vijay Kumar Banerjee (thelunatic)

https://thelunatic.dev/

Hey there! Welcome to my little corner of the internet! I am an Open source entusiast and I like to tinker with Embedded Operating Systems. This blog is a mixture of tutorials, experience, findings from experiments and discussions about the projects that I do. I Currently work with RTEMS[https://www.rtems.org/] as a Student Developer, for those who're confused what 'student developer' means, It's quite simple, I'm sometimes a developer and contribute code but mostly a student and learn a lot from the very experienced and helpful community ;-). If you'd like to connect with me, don't hesitate to choose any of the options at the top. I'm always up for some project discussions, experiments and feedback.

Vijay K. Banerjee (thelunatic)

Posts by Vijay Kumar Banerjee (thelunatic)

RTEMS GSoC 2019 Final Report: Add framebuffer driver for Beaglebone Black

A great summer comes to a conclusion now! Here’s the final report of all thecoding, debugging and documentation throughout the summer.

In RTEMS, GSoC, Aug 17, 2019

RTEMS now has Framebuffer support for Beaglebone Black

The Beablebone Black (BBB) Board support Package (BSP) in RTEMS now supportsframebuffer driver through libBSD. The drivers have been successfully portedfrom FreeBSD to RTEMS and as yo...

In RTEMS, GSoC, LIBBSD, Beagle, Aug 06, 2019

Writing an RTEMS LibBSD app using framebuffer device

While porting the framebuffer drivers from FreeBSD to RTEMS, the very firstrequirement was to have something simple to test the framebuffer. And the appshould be very simple and shoul...

In RTEMS, GSoC, LIBBSD, Jul 23, 2019

Using the I2C adaptation layer to read EEPROM

The I2C adaptation layer work is complete now and it is indeed working as alayer in between the RTEMS i2c stack and the iicbus stack in FreeBSD. But it’snot enough to see that the /de...

In RTEMS, GSoC, LIBBSD, Jun 02, 2019

Connecting RTEMS I2C stack with FreeBSD driver API

This is an interesting problem that we’re going to talk about today. Theapproach I have selected for doing the project, is to use code from FreeBSD andport it to RTEMS, so basically I...

In RTEMS, GSoC, LIBBSD, May 18, 2019

RTEMS GSoC 2019 Project Introduction: Add Framebuffer driver for Beaglebone Black

I got selected in GSoC 2019 with RTEMS!!

In RTEMS, GSoC, May 15, 2019

Getting started with RTEMS on Beaglebone black - part II

In the part I of this Getting started walkthrough, we have seen the steps ofbuilding the rtems source for the beagleboneblack Board Support Package (BSP).In this part we’ll use the he...

In BeagleBone Black, RTEMS, May 10, 2019

Getting started with RTEMS on Beaglebone black - part I

This is the very first post on the blog and what better way to begin a blog thana getting started post.

In BeagleBone Black, RTEMS, May 01, 2019